Designing hydro-energy led economic growth for pollution abatement: evidence from BRICS

Environmental Science and Pollution Research - Overutilized hydro-energy production through non-sustainable mode is detrimental for both the economy and the environment. Intermittent consumption of...     

Familial congenital diaphragmatic hernia: Prenatal diagnosis,management, and outcome

Congenital diaphragmatic hernia (CDH) is a developmental defect of as yet unknown aetiology which accounts for 8 per cent of all major congenital anomalies and is associated with up to 80 per cent mortality despite optimal postnatal treatment. The risk of recurrence of CDH for future sibs after one affected infant is about 2 per cent. A multifactorial/threshold inheritance pattern with an observed high male:female sex ratio is currently favoured for the rare occurrence of familial CDH, although other modes of inheritance have also been described. We report three cases of familial CDH, two of whom were brother and sister sibs and the third was a first cousin, born within 18 months of each other. The diagnosis was by ultrasound and there were several factors predicting a poor outcome. The mortality in this group was 100 per cent. The prenatal diagnosis, treatment options, the unusual genetic aspects, outcome, and the pathology involved are discussed.     

Quantitation of persistent organic pollutants adsorbed on plastic debris from the Northern Pacific Gyre's "eastern garbage patch"

Floating marine plastic debris was found to function as solid-phase extraction media, adsorbing and concentrating pollutants out of the water column. Plastic debris was collected in the North Pacific Gyre, extracted, and analyzed for 36 individual PCB congeners, 17 organochlorine pesticides, and 16 EPA priority PAHs. Over 50% contained PCBs, 40% contained pesticides, and nearly 80% contained PAHs. The PAHs included 2, 3 and 4 ring congeners. The PCBs were primarily CB-11, 28, 44, 52, 66, and 101. The pesticides detected were primarily p,p-DDTs and its metabolite, o,p-DDD, as well as BHC (a,b,g and d). The concentrations of pollutants found ranged from a few ppb to thousands of ppb. The types of PCBs and PAHs found were similar to those found in marine sediments. However, these plastic particles were mostly polyethylene which is resistant to degradation and although functioning similarly to sediments in accumulating pollutants, these had remained on or near the ocean surface. Particles collected included intact plastic items as well as many pieces less than 5 mm in size.     

Preparation and Properties of Biodegradable Foams

Foam extrusion of biodegradable polyester [poly(butylene adipate-co-terephthalate) (PBAT)] and its blends with maleated thermoplastic starch (MTPS) using a chemical blowing agent was performed. The effect of MTPS and percentage of chemical blowing agent on various foam properties is discussed. In general, an increased amount of PBAT in the foams improves the properties of the foams. The foam samples were characterized by measurements of density, expansion ratio, specific length, compressive strength, resiliency, moisture sorption, and imaging using digital light microscopy. Density, expansion ratio, and specific length measurements show that the best characteristics of lowest density, highest expansion ratio, and highest specific length are exhibited by the PBAT samples. The compressive strength and foam density exhibit a power-law relationship. Greater amounts of PBAT in the samples increase the resiliency and decrease the steady state weight gain during moisture sorption. All samples show regions of unfoamed material when only 3% chemical blowing agent is used, but when 5 and 7% chemical blowing agent is used, the samples exhibit cells throughout the matrix.     

Rheological and Thermal Properties of the PLA Modified by Electron Beam Irradiation in the Presence of Functional Monomer

Polylactic acid (PLA) has been modified by electron beam radiation in the presence of glycidyl methacrylate (GMA) to enhance the melt strength of PLA. The modified PLA was prepared by varying both the amount of GMA and the irradiation dose and was characterized by observing the thermal properties, the melt viscoelastic properties and the gel fraction. For comparison, virgin PLA was also irradiated. All irradiated virgin PLA had a lower complex viscosity and a storage modulus compared to virgin PLA due to irradiation-induced chain scission. However, these properties were remarkably improved due to formation of long chain branching and retarding chain scission if GMA was introduced in this system. The increase in melt viscoelastic property was much dependent on the irradiation dose. At optimum doses of radiation, it showed maximum complex viscosity and storage modulus. The PLA irradiated with 20 kGy in the presence of 3 phr GMA showed a complex viscosity of about 10 times higher and a storage modulus of 100 times higher than those of virgin PLA at 0.1 rad/s. Gel fraction measurement revealed that chain scission and branching was more dominant than crosslinking. The biodegradability of irradiated PLA was slightly decreased by the presence of GMA.     

Adaptation potential of ecosystem-based management to climate change in the eastern Canadian boreal forest

Ecosystem-based management (EBM) of forests is gaining acceptance for its focus on the maintenance of the long-term integrity of ecosystem processes, but climate change challenges this view because of its impacts on these very processes. We have therefore evaluated the robustness of EBM to projected climate change, considering the role of climate on forest growth and fire regime in a boreal forest of eastern Canada. A climate sensitive growth index model was calibrated for three commercial species and used to project the evolution of merchantable volume for two climate scenarios (B1 and A2) under conventional and EBM strategies. Current burn rate and burn rates under future climate scenarios were also considered. Under the most extreme projected climate scenario, the periodic timber supply could be reduced by up to 79% through direct (growth reduction) and indirect (fire) effects. However, ecological indicators show that EBM is a more robust forest management strategy than conventional one demonstrating its adaptation potential to climate change at least in the short term.     

Butyltins in the sediments of Kochi and Mumbai harbours, west coast of India

Surface sediment samples were collected from various locations in the Mumbai and Kochi harbours, west coast of India, to assess the presence of butyltin compounds. Tributyltin (TBT) and dibutyltin (DBT) varied from 16 to 16,816 ng/g dry wt. and from undetected to 469 ng/g dry wt., respectively, of the sediment in Kochi harbour. In Mumbai harbour, the values of TBT and DBT ranged between 4.5 and 1193 ng/g dry wt. and from undetected to 131 ng/g dry wt. of the sediments, respectively. The concentrations of both TBT and DBT showed strong seasonal variation probably due to the effect of tides and currents. Nevertheless, the levels of butyltin compounds were generally higher at sites influenced by shipping activities such as navigation, dry dock and ship-building activities. The presence of DBT indicates the abiotic or microbiological degradation of TBT. Compared to TBT, DBT was relatively less abundant, suggesting either fresh inputs of TBT and/or less degradation of TBT. The concentrations of TBT showed significant positive relationships with organic carbon and lipid, implying that both lipophilic and ionic interactions were probably involved in controlling the abundance of TBT at these sediments. The observed levels of butyltin compounds are much higher than those required to induce toxic effects on marine organisms, suggesting that these sediments were contaminated with butyltin compounds.     

Comparison of a plant based natural surfactant with SDS for washing of As(Ⅴ) from Fe rich soil

This study explores the possible application of a biodegradable plant based surfactant, obtained from Sapindus mukorossi, for washing low levels of arsenic （As） from an iron （Fe） rich soil. Natural association of As（Ⅴ） with Fe（Ⅲ） makes the process difficult. Soapnut solution was compared to anionic surfactant sodium dodecyl sulfate （SDS） in down-flow and a newly introduced suction mode for soil column washing. It was observed that soapnut attained up to 86% efficiency with respect to SDS in removing As. Full factorial design of experiment revealed a very good fit of data. The suction mode generated up to 83 kPa pressure inside column whilst down-flow mode generated a much higher pressure of 214 kPa, thus making the suction mode more efficient. Micellar solubilisation was found to be responsible for As desorption from the soil and it followed 1st order kinetics. Desorption rate coefficient of suction mode was found to be in the range of 0.005 to 0.01, much higher than down-flow mode values. Analysis of the PT-IR data suggested that the soapnut solution did not interact chemically with As, offering an option for reusing the surfactant. Soapnut can be considered as a soil washing agent for removing As even from soil with high Fe content.